How to Remove Scratches From Engineered Hardwood Floor

Even though engineered hardwood floors are easy to set up and are perfect for diverse weathered places, their design makes them a considerable nuisance. Since they have a wooden veneer finish, frequent sanding is not an option. To avoid wearing the surface down, you have to use alternative approaches when getting rid of tiny surface scratches.

What You Will Need

  • A broom
  • Soft piece of cloth or cotton wool
  • Some cleaning alcohol
  • Fine grit sandpaper
  • Floor repair wax kit or a wax stick of the right color
  • Wood stain

Get the Scratch Ready for the Operation

After identifying the scratch, clear surrounding furniture to create some ample working space. Sweep the floor clean with your regular sweeping broom and then carefully wash the scratch with a cloth or cotton wool dipped in alcohol. Ensure that you rub along the grains when cleaning for maximum cleaning effect and preservation of the patina.

Cleaning Alternative for Superficial Scratches

The wood veneer covering your engineered wood floor is normally 1/16 to 1/8 inches hence light sanding can clean any scratch shallower than this. Slightly sand the floor using your sandpaper taking heed not to go too deep or to sand areas without scratches. This helps limit your work, which is actually damaging in a way, to the bare minimum.

Curing the Deeper Scratches

Follow the instructions of use on your wax kit of choice. After you are sated with your handiwork, use the fine sandpaper to get rid of the extra filling and to gently rub the top of the finishing smooth. Remember that a top quality wax and a perfect color match will help you get flawless results.

Wrapping it up

If you delight in a smooth mark free surface, finish the job by applying a similar colored stain to the repaired surface. However, leaving scratches treated but unhidden can give it a more natural look. Normal wooden floors tend to have little marks here and there, it’s aesthetic and natural.

Possible Alternatives

If you do not want to walk down this path, you should consider professional cleaning agents that hide scratches. This will make your floor look unscratched, though it will still be there. The other simple alternative would be using a similar colored crayon to fill up the scratches. If done well, this will get your floor back to its normal looks at no extra cost- or perhaps at the expense of your kids crayon set.

An engineered wooden floor could be the closest you can get to the finesse and stature that comes with original wood floors- especially hardwood. Nonetheless, you have to be prepared in the ways of caring for your floors in order to ensure a longer lifespan. Even though fixing up your floor every now and then is inevitable, learning of the different ways to help reduce the frequency with which your floor gathers scratches will definitely be helpful. The rule of the thumb has it that prevention is always better than cure always abhor this.

Recommended Products

Leave a Reply